MPED
AutoPack
Packaging Materials
GAUGE: 50.60.70.80
micron
Multilayer
Poly Ethylene For Detergents
DESCRIPTION:
§ High gloss Milky White
film
§
Good seal under liquid & powder
contamination
§
High resistance for basic & acids
§ Puncture resistance
& toughness
§ Low heat seal
initiation temperature
§ Excellent heat seal
strength
APPLICATION:
s
§
Suitable for printing & laminating with other films
& Al foil
§
Suitable for liquid & powder detergent packaging
TECHNICAL
DATA
|
Typical
Value |
Test Method |
Unit |
Properties
|
||||
|
80 |
70 |
65 |
60 |
AP
|
Micron
|
Thickness
|
|
|
0.955 |
0.955 |
0.955 |
0.955 |
ASTM 1505
|
G
/cm² |
Density |
|
|
13 |
15 |
16.2 |
17.5 |
|
M²
/ kg |
Yield |
|
|
32 |
32 |
32 |
32 |
ASTM
D 882 |
N/mm² |
MD |
Tensile
Strength |
|
26 |
26 |
26 |
26 |
TD |
|||
|
700 |
700 |
700 |
700 |
ASTM
D 882 |
% |
MD |
Elongation
at Break |
|
800 |
800 |
800 |
800 |
TD |
|||
|
20 |
21.5 |
23 |
24 |
ASTM
D 882 |
N/mm² |
Tensile
strength at 10 % Elongation |
|
|
0.3 |
0.3 |
0.3 |
0.3 |
ASTM
D 1894 |
|
Coefficient
of Friction |
|
|
102:118 |
102:118 |
102:118 |
102:118 |
AP
|
Cº |
Heat
seal. Range |
|
|
32 |
32 |
32 |
32 |
AP |
N /25.4m m
|
Heat
seal. Strength ( 125c,
2 bar, 1 sec. ) |
|
|
0.5 |
0.5 |
0.5 |
0.5 |
AP |
|
Optical
Denisty |
|
|
83 |
83 |
85 |
85 |
ASTM
D 1457 |
G
U |
GLOSS
60 |
|
|
38 |
38 |
38 |
38 |
ASTM
D 2578 |
Dynes /cm |
Treatment
Level |
|
The property values represented in
the preceding table do not constitute product specifications, but represent
the average or typical values. Complete product specifications
and one-line certifications of compliance are available by request. Technical data and guidelines on this pages are presented for consideration, but are not
intended as recommendation for use of these products in any particular
application. NOR IS ANYTHING ON THIS PAGE INTENDED AS A REPRESENTATION OR
WARRANTY OF PERFORMANCE PROPERTIES WITH RESPECT TO THESE PRODUCTS
(INCLUDING, WITHOUT LIMITATION, ANY WARRNTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE). All products are, instead, sold subject to the
terms and conditions of the sales documents relating to each sale. It is
important that users undertake independent testing in order to verify the
suitability of any product for any particular application.