TECHNICAL DATA

Typical Value		Test Method	Unit	Properties
15	11	AP	Micron	Thickness
0.917	0.917	ASTM 1505	G /cm²	Density
72.7	99		M² / kg	Yield
45	45	ASTM D 882	N/mm²	MD	Tensile Strength
30	30	ASTM D 882	N/mm²	TD	Tensile Strength
700	700	ASTM D 882	%	MD	Elongation at Break
800	800	ASTM D 882	%	TD	Elongation at Break
23	24	ASTM D 882	N/mm²	Tensile strength at 10 % Elongation
3	3	ASTM D 1003	%	HAZE
80	80	ASTM D 1457	G U	GLOSS
200	150	AP	%	Pre Power Ratio

The property values represented in the preceding table do not constitute product specifications, but represent the average or typical values.

Complete product specifications and one-line certifications of compliance are available by request.

Technical data and guidelines on this pages are presented for consideration, but are not intended as recommendation for use of these products in any particular application. NOR IS ANYTHING ON THIS PAGE INTENDED AS A REPRESENTATION OR WARRANTY OF PERFORMANCE PROPERTIES WITH RESPECT TO THESE PRODUCTS (INCLUDING, WITHOUT LIMITATION, ANY WARRNTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). All products are, instead, sold subject to the terms and conditions of the sales documents relating to each sale. It is important that users undertake independent testing in order to verify the suitability of any product for any particular application.

TECHNICAL DATA

Properties

AP

Micron

Thickness

ASTM 1505