TECHNICAL DATA

Typical Value				Test Method	Unit	Properties
50	40	30	25	AP	Micron	Thickness
0.9	0.9	0.9	0.9	ASTM 1505	G /cm²	Density
21.8	27.6	36.8	44.2		M² / kg	Yield
58	60	64	68	ASTM D 882	N/mm²	MD	Tensile Strength
42	44	45	45	ASTM D 882	N/mm²	TD	Tensile Strength
700	700	700	700	ASTM D 882	%	MD	Elongation at Break
800	800	800	800	ASTM D 882	%	TD	Elongation at Break
20	21.5	23	24	ASTM D 882	N/mm²	Tensile strength at 10 % Elongation
0.25	0.25	0.25	0.25	ASTM D 1894		Coefficient of Friction
122:146	122:146	122:146	122:146	AP	Cº	Heat seal. Range
32	32	32	32	AP	N /25.4m m	Heat seal. Strength ( 125c, 2 bar, 1 sec. )
2.5	2.5	2	2	ASTM D 1003	%	HAZE
80	80	83	83	ASTM D 1457	G U	GLOSS
38	38	38	38	ASTM D 2578	Dynes /cm	Treatment Level

The property values represented in the preceding table do not constitute product specifications, but represent the average or typical values.

Complete product specifications and one-line certifications of compliance are available by request.

Technical data and guidelines on this pages are presented for consideration, but are not intended as recommendation for use of these products in any particular application. NOR IS ANYTHING ON THIS PAGE INTENDED AS A REPRESENTATION OR WARRANTY OF PERFORMANCE PROPERTIES WITH RESPECT TO THESE PRODUCTS (INCLUDING, WITHOUT LIMITATION, ANY WARRNTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). All products are, instead, sold subject to the terms and conditions of the sales documents relating to each sale. It is important that users undertake independent testing in order to verify the suitability of any product for any particular application.

TECHNICAL DATA

Properties

AP

Micron

Thickness

ASTM 1505

AP

N /25.4m m