MPEF

AutoPack

Packaging Materials

		Multilayer Poly Ethylene Film
	GAUGE: 40.50.80 micron

DESCRIPTION:

§ Special PE shrinkable film

§ Good controlled tightness & shrink ability

§ Good thickness variation leads to homogenous shrink ability

§ Has a balanced shrink ability on both sides

APPLICATION:

s

§ Suitable for cans, bottles, pallets, boxes & etc. packaging

TECHNICAL DATA

Typical Value				Test Method	Unit	Properties
80	60	40	30	AP	Micron	Thickness
0.923	0.923	0.923	0.923	ASTM 1505	G /cm²	Density
13.5	15.5	27	36		M² / kg	Yield
20	20	21	21	ASTM D 882	N/mm²	MD	Tensile Strength
18	18	18	18			TD
400	400	400	400	ASTM D 882	%	MD	Elongation at Break
500	500	500	500			TD
9.5	9.5	9.5	9.5	ASTM D 882	N/mm²	Tensile strength at 10 % Elongation
0.6	0.6	0.6	0.6	ASTM D 1894		Coefficient of Friction
135:146	135:146	135:146	135:146	AP	Cº	Heat seal. Range
60	60	60	60	AP	%	MD		Thermal Shrinkage
30	30	30	30			TD
9	9	9	9	ASTM D 1003	%	HAZE
43	43	43	43	ASTM D 1457	G U	GLOSS 20

The property values represented in the preceding table do not constitute product specifications, but represent the average or typical values.

Complete product specifications and one-line certifications of compliance are available by request.

Technical data and guidelines on this pages are presented for consideration, but are not intended as recommendation for use of these products in any particular application. NOR IS ANYTHING ON THIS PAGE INTENDED AS A REPRESENTATION OR WARRANTY OF PERFORMANCE PROPERTIES WITH RESPECT TO THESE PRODUCTS (INCLUDING, WITHOUT LIMITATION, ANY WARRNTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). All products are, instead, sold subject to the terms and conditions of the sales documents relating to each sale. It is important that users undertake independent testing in order to verify the suitability of any product for any particular application.