MPEF
AutoPack
Packaging Materials
GAUGE: 60.70
micron
Multilayer
Poly Ethylene Film
DESCRIPTION:
§ Multi layer PE film
§
High transparency & gloss
§ Good seal under liquid
contamination
§ Provides high speed
packaging on HFFS machine
APPLICATION:
s
§
Suitable for printing & lamination with other films
§
Suitable for Ice lolly, distilled
water & juices
TECHNICAL
DATA
|
Typical
Value |
Test Method |
Unit |
Properties
|
|
|
65 |
AP
|
Micron
|
Thickness
|
|
|
0.923 |
ASTM
1505
|
G
/cm² |
Density |
|
|
16.6 |
AP
|
M²
/ kg |
Yield |
|
|
28 |
ASTM
D 882 |
N/mm² |
MD |
Tensile
Strength |
|
23 |
TD |
|||
|
650 |
ASTM
D 882 |
% |
MD |
Elongation
at Break |
|
820 |
TD |
|||
|
12 |
ASTM
D 882 |
N/mm² |
Tensile
strength at 10 % Elongation |
|
|
0.3 |
ASTM
D 1894 |
|
Coefficient
of Friction |
|
|
102:115 |
AP
|
Cº |
Heat
seal. Range |
|
|
22 |
AP |
N /25.4m m
|
Heat
seal. Strength ( 113c, 2 bar, 1 sec. ) |
|
|
7 |
ASTM
D 1003 |
% |
HAZE |
|
|
60 |
ASTM
D 2457 |
G
U |
GLOSS 45 |
|
|
38 |
ASTM
D 2578 |
Dynes /cm |
Treatment
Level |
|
The property values represented in the preceding table do not
constitute product specifications, but represent the average or typical
values. Complete
product specifications and one-line certifications of compliance are
available by request. Technical
data and guidelines on this pages are presented for consideration, but are
not intended as recommendation for use of these products in any particular
application. NOR IS ANYTHING ON THIS PAGE INTENDED AS A REPRESENTATION OR
WARRANTY OF PERFORMANCE PROPERTIES WITH RESPECT TO THESE PRODUCTS
(INCLUDING, WITHOUT LIMITATION, ANY WARRNTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE). All products are, instead, sold subject to the
terms and conditions of the sales documents relating to each sale. It is
important that users undertake independent testing in order to verify the
suitability of any product for any particular application.